Installation Guide | Spanning Bracket
This is a simple and easy guide to installing a spanning bracket.
1. The first step is to verify the measurements and mark the correct mounting locations on each cabinet’s side wall. The 3” brackets are recommended to be used in the front and back of each cabinet.
2. The next step is cutting a 2 ½ inches wide and ½ inch deep mounting channel where the bracket will be temporarily placed. You can do this by using an oscillating multi-tool, a router, or a coping saw.
Warning: You have to be careful not to ruin any of the factory structural supports in the cabinets’ corners.
3. The third step is mounting the brackets on each cabinet.
4. Before securing the top in place, a bead of top notch quality silicone adhesive must be run down on each bracket’s center.